Tuesday, September 5, 2017

Good Customer Service from ICE



First ride with mesh seat. So far it's good.
I had a couple questions about the Sprint 26fs since I brought it back home. Both questions were answered by ICE within 24hours. That's what I call Good Customer Service.

I'm passing on what I learned from ICE. See below.



My Question September 4th.
On my new Sprint 26fs the dealer ordered a ergo mesh seat to replace the carbon fiber seat. Is the Ergo mesh Sprite RED56 the right seat? It can be adjusted to only one position. The forward two slots on the seat will not reach the quick release skewer. The third slot from the front barely reaches the quick release and is visually horizontal. I can only use the fourth slot and it is close to horizontal. The quick release skewer is in forward hole. No add on seat brackets are being used. Dealer is Bent Up Cycles. Your document # is 16199. Seat was shipped to Mark Rackow.


ICE'S Response September 5th.
Hi Mark,

Firstly it is the right seat if you are wanting to permanently change from your medium carbon seat to a mesh seat. 

  When we fit a hardshell seat to the sprint X like yours we extend the trike out to make it longer I.e. we pull out the back end. This is so the trike has a more reclined more streamline seating position and look. When we fit a mesh seat these are not as long in the frame as the hardshell so the back end does not come out as far which makes the trike a little shorter and the seating position a little more upright ( still quite reclined just not as laid back as the hardshell seat )

  In fitting the new mesh seat there are a few things that you will have to change on the trike to make it fit.
·         Bring the backend in further toward the cruciform( It will currently be set at a length of 495mm from the front quick release hole to the  back of the seat cup on the cruciform. You will need to shorten that down to 455mm measuring the same way for the mesh seat to fit correctly and work in all its positions)
·         Move the quick release forward to the front hole of the two
·         If the trike was mine I would shorten my outer parking brake cable and reset the parking brake
·         Again I would also shorten the rear gear cable outer and reset the rear gears

I know that that is quite a list of things that need to be done but this is how we set up the Sprint X for the two types of seat.

If you need any more helps with this or have any more questions please feel free to get back to me.

I hope all this helps

Thanks, 

Andy


___________________________________________________

My Question August 27th.
I have a new Sprint X 26 fs. Are the top of the front wheels suppose to lean in slightly on both sides when the wheels are facing straight? The toe in is adjusted properly.


ICE's Response August 28th.
Hi Mark,

There is supposed to be a tiny bit, maybe one-three degrees, of inward lean on the front wheels. They are designed to be close to vertical but if we make them exactly vertical there ends up being a bit of an optical illusion where they look like they lean outwards which looks wrong. 


Thanks, 

Patrick

Wednesday, August 30, 2017

ICE Sprint 26fs Back in the Stable

For reasons I'm not sure of the ICE Sprint 26fs I returned to Bent Up Cycles for re-sale did not sell after 10 months. I decided to give it a second chance but with a mesh seat. I went to Bent Up Cycles to pick it up. It turned out that the Carbon Seat had been sold off the trike. Oh well I didn't want it anyway. I picked up the seatless trike and ordered a mesh seat and Bent Up Cycles refunded me the difference.

It didn't take long for the new seat to arrive at my home.  I'll give the trike with the new seat a few spins along the coast and see how she feels.

Getting the ICE Sprint 26fs with new mesh seat setup for riding.

Saturday, August 26, 2017

Central Coast Weather

A typical summer day along the Central Coast. I usually bring along a couple extra layers of clothing to prepare for the varied conditions along the route.

This is the extent of the blue sky I saw today.
HWY 1 is to the left of the picture.

Friday, August 4, 2017

Central Coast Pics

Along HWY 1 north of Cambria in the area of Hearst Castle you'll find some of the best Central Coast riding around. You're riding close to the coast line and there's many opportunities to pull off the road and take it all in. As us bent riders know it's so easy to see it all from the comfort of a laid back seat.







Sunday, July 23, 2017

Nerve Damage Post Hip Replacement

If you're considering a hip replacement please read.

Back in 2013 both my hips were replaced and left me with some problems. To begin with the right hip has suffered calcification of the soft tissue (heterotopic ossification). It hasn't gotten any worse after the first year and I've learned to mitigate the stiffness it causes through exercise, cycling and an occasional deep tissue message. 

The other problem caused by the replacement is the atrophy of the medial head of the Gastrocnemius of my calf muscles. It took a long time to recognize the problem. I've concluded that there is nothing I can do on my own to build up the muscle. I can't get that part of the Gastrocnemius to fire up. It seems that the nerves were damaged to that part of muscle. It might been caused by the torture table that was used to rotate the hips open as part of the anterior hip replacement procedure. Severe twisting of the lower leg to open the hip joint is my guess as to what caused the damage. 

For now I've become used to the situation and it has no pronounced effect on cycling as long as long as I'm clipped in to the pedals. The Gastrocnemius attaches to the back base of the Femur. Along with the less powerful Soleus muscle which attaches to the top and back of the Fibular the Gastrocnemius and Soleus comprise the primary muscles of the calf. So I still have enough strength to stabilize the lower leg and ankle. However walking is a little funky. 

I would think twice about doing the Anterior hip replacement again if I had more hips to replace.




Thursday, June 29, 2017

W R Hearst State Beach

A ride up the Coast to William Randolph Hearst Memorial State Beach. The beach and the pier are opposite the entrance to the Hearst Castle. The cove was used for trade as well as to harbor ships full of guests to Hearst's little get togethers.






Sunday, June 25, 2017